TF170 Universal Pump Design

TraditionalFlo pump is designed to handle a wide range of fluids in very large volume transfer and fluid evacuation applications.

Balcrank’s TraditionalFlo 170 pump transfers fluid up to 170 gal/min. Combining conventional flow design with pivoting air valve for increased delivery and reliable performance.

Part No.:

1120-041 TF170 Aluminum

Markets Served:

Mining and construction, Lube Trucks, In-plant transfer, Railroad and mass transit vehicles, Agriculture/Farm implement
 
Technical Data
** Balcrank does not recommend pumping windshield wash or any other fluid below 100° flash point.
Contact Balcrank for additional information.
3/4” NPT(F)
2 ” NPT(F)
2 ” NPT(F)
170 gal/min (650 l/min)
20-120 psi (1.5-8 bar)
1/4” (6.4 mm)
Aluminum, Hytrel®, Viton®
Anti-freeze (Glycol), windshield wash solution, lubricants, waste oil, waste fluid, used fluid and anti-freeze, hydraulic oil
Very large volume transfer, de-wattering and fluid evacuation
SB 1206

1” UL Aluminum 45 gal/min

These conventional pumps may be used as stand-alone pumps for transfer applications or as system pumps that include hose reels. Model 1120-015S is UL79 listed for pumping: Diesel Fuel, No. 4 Fuel Oils (or lighter), Motor Oil, Kerosene, and Water.

Part No.:

1120-015S 1” UL Aluminum AODD Pump

Markets Served:

Car and truck dealers, Fleets, Lube Trucks, In-plant transfer, Construction, Mass transit vehicles
 
Technical Data
** Balcrank does not recommend pumping windshield wash or any other fluid below 100° flash point. Contact Balcrank for additional information.
1/2” NPT(F)
1” NPT(F)
1” NPT(F)
45 gal/min (170 l/min)
45 - 100 psi (3-6.8 bar)
1/4” (6 mm)
Nitrile, Neoprene, PTFE, polypropylene and Polyethylene
Light viscosity fluids synthetic, mineral oils, and diesel fuel
Fluid dispensing, transfer, and evacuation.
SB 1113