FLUID Used Fluids
UP20 2″ Pump – Polypropylene
This Pivot Series pump is designed to handle a wide range of fluids in very large volume transfer and fluid evacuation applications.
The UP20 Pivot Series pump transfers fluid up to 170 gal/min. Combining a conventional flow design with a special pivoting air valve for increased reliability. This pump can be used as a stand-alone pump for transfer or as a system pump for fluid distribution.
Part No.:
1120-051 - 2” Diaphragm Pump Polypropylene UP20B-FPS-PHC
Market Served:
Mining and construction, Lube Trucks, In-plant transfer, Railroad and mass transit vehicles, Agriculture/Farm implement
Product Specifications
3/4” NPT(F)
2 ” NPT(F)
2 ” NPT(F)
172 gal/min (650 l/min)
20-100 psi (1.5-7 bar)
1/4” (6.4 mm)
Refer to materials table at the bottom of the page
Anti-freeze (Glycol), lubricants, used oil, used fluids, and hydraulic oil
Very large volume transfer, dewatering and fluid evacuation
--
1” UL Aluminum 46 gal/min
This conventional pump may be used as stand-alone pumps for transfer applications or as system pumps that include hose reels. Model 1120-015Y is UL79 listed for pumping: Diesel Fuel, No. 4 Fuel Oils (or lighter), Motor Oil, Kerosene, and Water.
Part No.:
1120-015Y - 1” UL Aluminum AODD Pump
Market Served:
Car and truck dealers, Fleets, Lube Trucks, In-plant transfer, Construction, Mass transit vehicles
Product Specifications
3/8” NPT(F)
1” NPT(F)
1” NPT(F)
46.2 gal/min (175 l/min)
20 - 100 psi (1.4-6.8 bar)
Nitrile, Neoprene, PTFE, polypropylene and Polyethylene
Light viscosity fluids synthetic, mineral oils, and diesel fuel
Fluid dispensing, transfer, and evacuation.
SB 1114