CenterFlo CF15

CenterFlo pumps can handle a wide range of fluids used for vehicle service. Typical applications are transferring and dispensing up to 15 gal/min. They can be used as stand-alone pumps for transfer applications or as systems pumps in distribution systems that include hose reels.

Fluids Handled

Part No.:

1120-023A - CF15 Polypropylene
1120-025A - CF15 Polypropylene / DEF

Markets Served:

Quick Lubes, Tire Shops, Car and truck dealers, In-plant transfer
 
Technical Data
** Balcrank does not recommend pumping windshield wash or any other fluid below 100° flash point. Contact Balcrank for additional information.
3/8” NPSM(F)
1/2” NPT(F) 1120-023A, BSPP(F)
1/2” NPT(F), BSPP(F)
15 gal/min (50 l/min)
22 to 102 psi (1.5 to 7 bar)
1/8” (3 mm)
PTFE (Teflon®), Viton®, Polypropylene, Stainless Steel, and Hytrel®
Anti-freeze (Glycol) and windshield wash solution / Diesel exhaust fluid
Fluid dispensing and transfer
SB 1145

CenterFlo CF15 Aluminum

CenterFlo pumps can handle a wide range of fluids used for vehicle service.

Typical applications are transferring and dispensing up to 15 gal/min. They can be used as stand-alone pumps for transfer applications or as systems pumps in distribution systems that include hose reels.

Fluids Handled

Part No.:

1120-027 - CF15 Aluminum

Markets Served:

Quick Lubes, Tire Shops, Car and truck dealers, In-plant transfer
 
Technical Data
** Balcrank does not recommend pumping windshield wash or any other fluid below 100° flash point. Contact Balcrank for additional information.
3/8” NPSM(F)
1/2” NPT(F
1/2” NPT(F)
15 gal/min (50 l/min)
22 to 102 psi (1.5 to 7 bar)
1/8” (3 mm)
Aluminum, PTFE, Viton®, Polypropylene, Buna-N™, and Stainless Steel
Light viscosity fluids, synthetic, mineral oils, anti-freeze, and used oil
Fluid dispensing and transfer
SB 1145

CenterFlo CF15 Mixing

CenterFlo pumps with a dual inlet for 1:1 ratio mixing of fluids with similar viscosities, like windshield wash or anti-freeze with water. All dual inlet pumps have 2 x 2 – 3/8” NPT(F) inlet ports.

Fluids Handled

Part No.:

1120-028A CF15 Polypropylene Mixing

Markets Served:

Quick Lubes, Car and truck dealers
 
Technical Data
** Balcrank does not recommend pumping windshield wash or any other fluid below 100° flash point. Contact Balcrank for additional information.
3/8” NPSM(F)
2 - 3/8” NPT(F)
1/2” NPT(F) & flange
15 gal/min (50 l/min)
22 to 102 psi (1.5 to 7 bar)
1/8” (3 mm)
PTFE (Teflon®), Viton®, Polypropylene, Stainless Steel, Acetal, and Hytrel®
Anti-freeze (Glycol) and windshield wash solution
Dual inlet pumps for 1:1 proportion mixing of fluids with similar viscosity. NOTE: both fluids and their resulting solution must be compatible with the pump wetted materials
SB 1145