LION™ 450 – 3:1 Pump

Medium pressure pump for oil systems where high volume dispensing using simultaneous dispense points is required. This pump is recommended for medium pumping distances.

Part No.:

1430-001 Lion™ 450 3:1 stub pump

Markets Served:

Mining vehicle maintenance, Large automotive dealerships, Heavy duty truck/fleet, Railroad and mass transit vehicle maintenance, In-plant high volume transfer, Marine
 
Technical Data
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(2) Maximum noise level measured at 3’ (1 m) from the pump, 100 psi (7 bar) air pressure and free delivery.
(3) Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor.
NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump.
Warning! Do not use any Lion™ 450/600 series products with flammable fluids.
Verify fluid compatibility with MSDS sheets.
Contact Balcrank for specific system design performance and technical data.
30 to 180 psi (2 to 12.4 bar)
6
28 CFM (800 Nl/min)
510 psi (36 bar)
4.5” (115 mm)
4” (100 mm)
12 gal/min (45 l/min)
32 gal/min (120 l/min)
1/2” NPT(F)
1 1/2” NPT(F)
3/4” NPT(F)
Steel, Hard Chromed Steel, Zinc Plated Steel, Stainless Steel, Cast Iron, Polyurethane, Buna-N™, Bronze Filled PTFE
80 dB
SB 1134

LION™ 450 – 6:1 Pump

Medium pressure pump for oil systems where high volume dispensing using simultaneous dispense points is required. Medium/high pressure pump is recommended for longer pumping distances.

Part No.:

1430-002 Lion™ 450 6:1 stub pump

Markets Served:

Mining vehicle maintenance, Large automotive dealerships, Heavy duty truck/fleet, Railroad and mass transit vehicle maintenance, In-plant high volume transfer, Marine
 
Technical Data
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(2) Maximum noise level measured at 3’ (1 m) from the pump, 100 psi (7 bar) air pressure and free delivery.
(3) Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor.
NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump.
Warning! Do not use any Lion™ 450/600 series products with flammable fluids.
Verify fluid compatibility with MSDS sheets.
Contact Balcrank for specific system design performance and technical data.
30 to 180 psi (2 to 12.4 bar)
11
29 CFM (830 Nl/min)
1,020 psi (72 bar)
4.5” (115 mm)
4” (100 mm)
7 gal/min (25 l/min)
26 gal/min (98 l/min)
1/2” NPT(F)
1 1/2” NPT(F)
3/4” NPT(F)
Cast Iron, Hard Chromed Steel, Steel, Polyurethane Buna-N™ and Zinc
80 dB
SB 1135

LION™ 450 -10:1 Pump

High pressure pump for oil systems where medium volume dispensing using simultaneous dispense points is required. High pressure pump is recommended for long pumping distances and/or cold weather applications

Part No.:

1430-003 Lion™ 450 10:1 stub pump
1430-004 Lion™ 450 10:1 drum pump

Markets Served:

Mining vehicle maintenance, Large automotive dealerships, Heavy duty truck/fleet, Railroad and mass transit vehicle maintenance, In-plant high volume transfer, Marine
 
Technical Data
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(2) Maximum noise level measured at 3’ (1 m) from the pump, 100 psi (7 bar) air pressure and free delivery.
(3) Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor.
NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump.
Warning! Do not use any Lion™ 450/600 series products with flammable fluids.
Verify fluid compatibility with MSDS sheets.
Contact Balcrank for specific system design performance and technical data.
30 to 180 psi (2 to 12.4 bar)
19
30 CFM (850 Nl/min)
1,700 psi (120 bar)
4.5” (115 mm)
4” (100 mm)
4 gal/min (15 l/min)
18 gal/min (68 l/min)
1/2” NPT(F)
1 1/2” NPT(F)
3/4” NPT(F)
Cast iron, Hard Chromed Steel, Steel, Polyurethane, Buna-N™, and Zinc
80 dB
SB 1136

LION™ 600 – 6:1 Pump

Medium/high pressure pump for oil systems where high volume dispensing using simultaneous dispense points is required. This pump operates at slow cycle rates for high volume applications. Medium/high pressure pump is recommended for longer pumping distances.

Part No.:

1430-005 Lion™ 600 6:1 stub pump

Markets Served:

Mining vehicle maintenance, Large automotive dealerships, Heavy duty truck/fleet, Railroad and mass transit vehicle maintenance, In-plant high volume transfer, Marine
 
Technical Data
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(2) Maximum noise level measured at 3’ (1 m) from the pump, 100 psi (7 bar) air pressure and free delivery.
(3) Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor.
NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump.
Warning! Do not use any Lion™ 450/600 series products with flammable fluids.
Verify fluid compatibility with MSDS sheets.
Contact Balcrank for specific system design performance and technical data.
30 to 175 psi (2 to 12 bar)
6
39 CFM (1,100 Nl/min)
1,020 psi (72 bar)
6” (150 mm)
4” (100 mm)
9 gal/min (35 l/min)
26 gal/min (100 l/min)
1/2” NPT(F)
1 1/2” NPT(F)
3/4” NPT(F)
Cast Iron, Aluminum, Nickel, Steel, Polyurethane, Buna-N™, and Zinc
80 dB
SB 1137

LION™ 600 – 12:1 Pump

High pressure pump and high-volume, can be used with simultaneous dispense points. This pump operates at slow cycle rates for large shops requiring long pumping distances and applications when cold weather or low air pressure could limit pump performance.

Part No.:

1430-006 Lion™ 600 12:1 stub pump

Markets Served:

Mining vehicle maintenance, Large automotive dealerships, Heavy duty truck/fleet, Railroad and mass transit vehicle maintenance, In-plant high volume transfer, Marine
 
Technical Data
(1) Maximum air consumption with 75 psi (5 bar) air inlet pressure and 80 cpm.
(2) Maximum noise level measured at 3’ (1 m) from the pump, 100 psi (7 bar) air pressure and free delivery.
(3) Ensure that all hose fittings and piping are rated for fluid outlet pressures. Balcrank recommends a minimum of 3x safety factor.
NOTE: Thermal expansion of the fluid in a distribution system can cause an increase in system pressure that can damage lubrication system components. Use pressure relief valve kit included with this pump.
Warning! Do not use any Lion™ 450/600 series products with flammable fluids.
Verify fluid compatibility with MSDS sheets.
Contact Balcrank for specific system design performance and technical data.
30 to 180 psi (2 to 12.4 bar)
11
41 CFM (1,150 Nl/min)
2,040 psi (144 bar)
6” (150 mm)
4” (100 mm)
5 gal/min (20 l/min)
17 gal/min (65 l/min)
1/2” NPT(F)
1 1/2” NPT(F)
3/4” NPT(F)
Cast Iron, Hard Chromed Steel, Steel, Polyurethane, and Buna-N™
80 dB
SB 1138